CNC Lathe
Specifications:
 |
| Item |
Standard |
Metric |
| Swing in gap |
38.18” |
970mm |
| Swing over bed |
27.77” |
680mm |
| Swing over cross slide |
9.44” |
340mm |
| Max. cutting length |
47.24”/86.61”/120.07”/159.44”/
196.85”/236.22” |
1000/2200/3050/4050/
5050/6050mm |
| X axis travel |
16.73” |
425mm |
| Z axis travel |
47.24”/82.67”/120.07”/159.44”/
198.81”/238.18” |
1200/2100/3050/4050/
5050/6050mm |
| Rapid traverse (X & Z) |
393.70”/min & 472.44”/min |
10M/min & 12M/min |
| Spindle bore |
6.02” |
153mm |
| Spindle speed |
15rpm-1480rpm |
15rpm-1480rpm |
| Main power |
20.11/29.50hp |
15/22kw |
|
* Specifications are subject to change without notice.
Standard Accessories:
- Fanuc OITD CNC Control
- 6.02" spindle bore
- Main spindle motor
- Gear head
- Automatic speed changer
- Chuck sliding guard with interlock device
- Gap bed
- Tailstock
- Traveling front single door with interlock safety device
- Coolant system
- Lubrication system
- Low voltage circuit system
- Protable MPG
- CE Norms
- Leveling pads
- Operation manual & parts list (in English)
- Tool set & kits
|
Optional Accessories:
- Fagor and Siemens Controls available
- TB-200 V8/VDI50 turret, brand Baruffaldi
- LS-200 8 station hyd. turret
- Boring bar base/holder
- TBMA-200 V8/VDI50 power turret, brand Baruffaldi
- C axis
- Rear chuck mounting preparation
- Rear chuck guard
- Manual 3-jaw chuck
- Hyd. 3-jaw chuck
- Automatic bar feeder
- Roller steady rest 1.96"-11.81"
- Roller steady rest 9.84"-14.96"
- Hydraulic steady rest preparation
- Follow rest .78"-7.78"
- Hyd. tailstock quill
- Rotating tailstock quill
- Tailstock end cover with limit switch (for 39.37" – 157.48" length only)
- Full enclosure guarding for 40"/80"/120"/160" length
- Chip conveyor + wash down system
- Air conditioner for electric cabinet
- Heat exchanger for electric cabinet
- EMC
- Transformer for other than 220V
- Tool holders
- Fanuc 0iTC with 10.4" LCD display and manual guide
|
|
