CNC Lathe
Specifications:
 |
| Item |
Standard |
Metric |
| Swing in gap |
31.10” |
790mm |
| Swing over bed |
21.65” |
550mm |
| Swing over cross slide |
12.20” |
310mm |
| Max. cutting length |
39.37”/59.05”/78.74”/
118.11”/157.48” |
1000/1500/2000/
3000/4000mm |
| X axis travel |
11.81” |
300mm |
| Z axis travel |
45.27”/64.96”/84.64”/
120.07”/159.44” |
1150/1650/2150/
3050/4050mm |
| Rapid traverse (X&Z) |
590.55”/min & 590.55”/min |
15M/min & 15M/min |
| Spindle bore |
3.22” (std.) / 4.17” (opt.) |
82mm (std.) / 106mm (opt.) |
| Spindle speed |
80-3500rpm (3.22”),
80-2400rpm
(3.22”/4.17”) |
80-3500rpm (82mm),
80-2400rpm
(82/106mm) |
| Main power |
14.75hp/20.11hp (std.)/20.11hp/
29.50hp (opt.) |
11/15kw (std.)/15/22kw (opt.) |
|
* Specifications are subject to change without notice.
Standard Accessories:
- Fanuc OITD CNC Control
- 3.22" spindle bore
- 14.75/20.11hp main spindle motor for center length 40"/60"/80"
- 20.11/29.50hp main spindle motor for center length 120"/160"
- Automatic speed changer
- Chuck sliding guard with interlock device
- Gap bed
- Tailstock
- Fully enclosed front guarding with interlock system for center length 40"/60"/80"
- Traveling front single door with interlock safety device for center length 120"/160"
- Coolant system
- Lubrication system
- Low voltage circuit system
- CE Norms
- Leveling pads
- Operation manual & parts list (in English)
- Tool set & kits
|
Optional Accessories:
- Fagor and Siemens Controls available
- Enlarged 4.17" spindle bore
- Cam lock D1-8 spindle bore for 3.22"/4.17" spindle
- 2400rpm spindle speed
- 20.11/29.50hp spindle bore
- TB-160 V8/VDI40 turret, brand Baruffaldi
- LS-160 8 station hyd. turret
- Electric 4 way tool post
- Boring bar base/holder
- TBMA-160 V8/VDI40 power turret, brand Baruffaldi
- C axis
- Rear chuck mounting preparation
- Rear chuck guard
- Manual 3-jaw chuck
- Hyd. 3-jaw chuck
- Automatic bar feeder
- Roller steady rest .78-7.87"
- Roller steady rest 5.90-11.8"
- Hydraulic steady rest preparation
- Follow rest .78"-7.87"
- Enlarged 3.93" tailstock quill
- Hyd. tailstock quill
- Tailstock end cover with limit switch
- Full enclosure guarding for 120"/160" length
- Chip conveyor + wash down system
- Air conditioner for electric cabinet
- Heat exchanger for electric cabinet
- EMC
- Protable MPG
- Transformer for other than 220V
- Tool holders
- Fanuc 0iTC with 8.4" LCD display and manual guide 0i
- Fanuc 0iTC with 10.4" LCD display and manual guide i
|
|
